Primer for bitumen materials

Catalog Number: 106

Primer 106 is a solution composed of a blown, hard and flexible bitumen mixture with selected hydrocarbon solvents. Primer 106 does not contain water or water dissolvent materials. Primer 106 dries quickly.


Primer 106 is used as foundation coating for bitumen coatings.  Primer 106 binding to humid surface areas permits to use this material as foundation paint for humid concrete surfaces.

Technical Specifications


Black shiny liquid           

Specific Weight :

0.9 gr./ ml

Water Contents :

No water

Viscosity at 25 ºC seconds (CPS) :

25 - 60

Residue after refining (by volume):

35 minimum

Penetration at 25 ºC at 100 gr. weight

5 seconds (at 0.1 mm.) :

20 - 50

Materials dissolving in trichloroethylene

99 % minimum


Before using Primer 106, the surface to be treated should be thoroughly cleaned of any rust, grease and debris. Use spraying or paintbrush to apply the primer. Primer 106 is ready for use with paintbrush. For spraying, it should be diluted with mineral turpentine (up to 5 %, according to need).

Coating Capacity

3 – 5 m² per 1 kg for painting over concrete

4 – 10 m² per 1 kg for painting over iron.

Product Consumption

200 – 300 grams per 1 square meter.

Drying Time

1 to 3 hours, subject to weather conditions and coating thickness.


180 kg, 15 kg

4.5 liters, 1 liter.

Safety Precautions

  • This product contains flammable solvents, only use it in well ventilated areas. Use personal protective gear. 
  • Avoid contact with hot surfaces, parks, flames.
  • Avoid breathing the material fumes. 
  • Avoid contact with skin, eyes. 
  • If swallowed do not induce vomiting and get prompt medical attention. 
  • Static discharge can cause fire. 
  • Empty containers retain product residues that can be dangerous and should be disposed properly.  
  • Wash your hands with water and soap after use.


All materials are not available for all countries. 

Contact your dealer about the availability.