MASTIGARDEN
A Water-Based Bitumen Elastomeric Sealing Material
MASTIGARDEN
Cat. No. 246
Mastigarden is a waterbased bitumen elastomeric sealing material.
Mastigarden has excellent sealing features exhibiting flexibility and elasticity in a wide range of temperature (from –10°C to 100°C).
Mastigarden contains a special antiroot agent according to DIN 4062, in intensified quantity.
The Purpose
Mastigarden is mostly suitable for sealing of flower boxes and small roof gardens.
Technical Specifications
|
Appearance: |
Black and brilliant paste |
|
Specific weight: |
1.18 gr/m³. |
|
Viscosity: |
> 40,000 CPS |
|
Solid Content (%): |
65. |
|
Heat resistance at 80°c: |
Material doesn’t slip or leak |
|
Cold flexibility at -10°c: |
Material doesn’t crack |
|
Stagnant water resistance |
Mastigarden is resistant to stagnant water and remains attached to the base without generating bubbles. |
|
Elongation at break: |
1000% |
|
Resilience: |
85% |
|
Climatic resistance: |
Very good (after coating with "bitumsilver"). |
Application
Before use the surface shall be cleaned and all dirt removed.
Primary layer of Mastigum primer shall be applied and dry for 1-3 hours. Then the coating shall applied as follows:
- Apply a layer of Mastigarden, 1.5 kg m², and let dry for 2-4 hours.
- Apply the second layer of Mastigarden, 1.5 kg /m². let it dry for 2-4 hours.
- Apply the third layer of Mastigarden, 1.5 kg/m². let it dry for 7 days prior to filling with soil for cultivation.
- For drainage improvement of the flower box, it is recommended to spread a geotextile fleece over flower box walls/floor.
- Than, spread a small size aggregates in layer of 5 cm thick and spread another layer of geotextile prior to filling with soil for cultivation.
Consumption
1.5 kg/m² in each layer (3 layers).
Drying Time
Dry to contact time – 2-4 hours.
Final dry time – one week.
Packaging
18 Lit., 4.5 Lit.
Notes
- Do not store in cans at temperatures under 10°c (50ºf).
- This product is ready for application and should not be diluted. If appears slightly thick, mix manually or mechanically to reduce viscosity.
- Use an appropriate “Airless” sprayer to apply the product.
- Immediately after use, clean tools first with water, then with turpentine.
- The concrete surface will be dry for at least 3 days prior to the application of Mastigarden.
- Do not apply the Mastigarden, if rain is expected within the next 4 days.
- A flooding test may be preformed after 7 days from completing the application.